Turkish Ceramic Models and Prices

What to consider while buying Turkish Ceramics?

Ceramic products are utensils made of clay or pottery clay that have been kneaded and fired. Ceramic Ware has a long history, and simple and rough ceramics have been seen for the first time in the Neolithic Age. Ceramics were used as a daily necessity in ancient times, and are generally collected as handicrafts now. Because of its extremely high plasticity, it can transform into various shapes, and it has many uses and high collection and appreciation value.

The invention of ceramic products is the earliest beginning of human beings to use chemical changes to change natural properties, and it is one of the symbols of the development of human society from the Paleolithic to the Neolithic.

Ceramic products are formed from clay, dried, and fired in a kiln at 950-1165°C. They are porous, opaque, non-vitreous, usually glazed or unglazed. Glazed or not refers to utensils fired with clay. The texture is rougher than porcelain and is usually yellowish-brown. They are also painted with other colors or colored patterns. The Neolithic began to appear in large numbers. Most modern pottery is coated with coarse glaze.

Generally, ceramics are handcrafted and fired on a campfire. The firing time is short, but the maximum temperature reached by the fire can be very high, about 900 ° C, and the speed is very fast. Clays mixed with sand, gravel, broken shells, or broken ceramics are used to make campfire ceramics because they provide an open green texture where water and other volatile components can easily Leave. The coarser particles in the clay also act to limit the internal shrinkage of the ceramic body upon cooling, a process that occurs at a slow rate and reduces thermal stress and the potential for cracking.

Early bonfire-fired ceramics were mainly round-bottomed to avoid sharp corners that would make cracking prone. The earliest kilns were cave kilns or ditch kilns, that is, a hole was dug in the ground and then covered with fuel. Holes in the ground provide optimum thermal insulation and allow for better control of the firing process.

The factors that affect the appearance of ceramic products are as follows: Temperature and time; In general, the firing temperature of pottery is 800-1200 degrees Celsius. The firing method of ceramics in the kiln is not only affected by the highest temperature reached, but also by the length of firing time. The air in the kiln; Air entering the kiln causes oxidation, which oxidizes the clay and glaze. Fuel selection; Kilns can be heated by burning wood, coal, gasoline, or using electricity. But using coal, or wood brings soot and ash into the kiln. For the above reasons, ceramics are protected with a fire clay box when coal or wood is used. But in fact, modern multi-purpose gasoline or electric kilns are cleaner, easier to control, and have a shorter firing time.

There are many styles and patterns of ceramics in Turkey. Gorgeous Turkish red and cobalt blue, exquisite handicrafts are very Turkish. Ceramic is stronger, more malleable, and has better concealment and heat resistance than glass. It plays an important role in our life. Secondly, pottery is also an important product for the Turkish export industry.

Ceramic products have many advantages; ceramics have low water absorption and compared with our commonly used wood and stone, there is no color difference, no radiation, and no cracking. Ceramic material is very environmentally friendly, easy to maintain, and has a long service life. Ceramics do not get moldy due to weather or humidity changes and are UV resistant. Even when exposed to wind and sun, the appearance of ceramics hardly changes, so it is often used for outdoor decoration. Ceramics also have super wear resistance, are not easy to deform or fade, and are suitable for storage or cleaning, because ceramics will not be corroded by chemical substances such as cups of juice and detergents, and their performance is stable. At the same time, ceramics also have the characteristics of flame retardant, which will not melt and can be used for a long time. Ceramics are not only practical but also highly artistic. The changing colors of ceramics and their changing shapes can show a variety of different effects, which can not only meet people's requirements for environmental protection but also show the user's personality and personality.

Things to know when purchasing Turkish Ceramics are listed below.

Due to the fragile nature of ceramics, care should be taken to ensure that the Turkish ceramic products you purchase are free of scratches and cracks
When buying Turkish ceramic products, pay attention to whether there are products that can meet your needs
Be careful not to spill or be too rough in the glazing of porcelain produced after molding
The ceramic product must be suitable for the age group of the recipient. For example, ceramic is fragile and some heavy objects are not suitable for children because they can scratch or bruise children. But it is very suitable and elegant as a wedding gift, because Turkish porcelain has a strong Turkish character, and it can also be given to friends who travel with it.
Please confirm all the product information you need, such as shape, size, etc. before purchasing.

What are the Features of Turkish Ceramic Products？

Turkish ceramics have a long history of 8000 years. Today the Turkish ceramics industry is combining tradition and modernity, innovation and technology, design and quality to create a new ceramic culture. Turkish ceramics are meeting the different needs of countries around the world.

There are many classification methods for ceramics. Generally, people are used to classifying them according to their uses. They can be divided into daily ceramics, art (display) ceramics, sanitary ceramics, architectural ceramics, electrical ceramics, electronic ceramics, etc. Ceramics is a general term for pottery, stoneware, and porcelain. Usually, clay and porcelain clay are used as raw materials, after batching, molding, and drying. Ceramics are something we see a lot in our lives.

Ceramics are mentioned in our daily life, which is the collective name of the two types of pottery and porcelain. In the production process, pottery and porcelain are both indispensable and important parts of art, but pottery and porcelain are qualitatively different. Among them, the texture of pottery is relatively loose, the particles are relatively coarse, the firing temperature is between 900 and 1500 degrees, and the temperature is relatively low. There are many types of pottery, the most common are black pottery, red pottery, red ceramics, etc. Porcelain is different, the texture of porcelain is hard, relatively fine, and at the same time resistant to high temperature, rich in glaze color, the firing temperature is generally 1300 About the degree, the porcelain is more noble and gorgeous to people, which is just the opposite of the simplicity of the pottery, so these two types bring different sensory enjoyment to the artists. Therefore, in these two kinds of production, the characteristic analysis of the materials is very necessary. It is also the people's understanding and cognition of ceramics.

In addition to our common bowls, plates, vases, and other things we see in daily life, there are many classifications of ceramics. Generally speaking, ceramic materials have high hardness and poor toughness. For example, ceramic engines. However, with the continuous improvement of the level of science and technology, people add other substances to ceramic materials to greatly improve their toughness. The weather resistance of ceramics is obvious to all. For example, many containers contain strong acids and alkalis, aerospace For the protective cover of the aircraft, ordinary materials cannot withstand this temperature. In short, the performance of ceramic materials is multi-faceted, and its prospects are limitless. Environmentally friendly, easy to clean, beautiful.

What is the Price Range of Ceramic Products?

The price range for ceramics is between 1 Euro to 1260 Euro. Wholesale buying options offer buyers better prices. Please create a B2B account to buy in bulk at wholesale prices.

How are the Prices of Turkish Ceramic Products determined?

The most important factor in determining the price of ceramic products is craftsmanship. The formal processing of ceramics is an amazing art. The production of pottery is extremely elegant. From selecting clay, shaping, coloring, and baking, every process needs to be accurate. Different materials, different dyes, and different production methods will also affect the price. In addition, Turkish pottery is highly artistic, with various colors and many functions, which can show many different effects, which can not only meet people's requirements for environmental protection but also show the characteristics and grades of users.

What are the types of Turkish Ceramic Products?

Types of Turkish Ceramic products are as follows:

How to Use Turkish Ceramic Products?

Keychains are used to keep keys together and prevent them from being lost and are also decorative items that hang from keyrings. A figurine is a small three-dimensional sculpture that can be decorated or admired. The wall hanging can be hung on the wall for decoration. The decorative plates can either hold food or be hung on the wall for decoration. Bell; It consists of two parts: the bell-shaped body and the handle. It makes a crisp sound by shaking it. The pitcher is a container for holding and pouring liquids. A teacup is an earless cup that holds tea. After pouring teacups, guests can enjoy the tea. A teapot is a pot for brewing and pouring tea. It consists of a lid, body, and feet. The size of the teapot can be chosen according to the number of people drinking the tea. Coffee cups are mainly used for drinking coffee. A mug is a cup with a large handle. It is commonly used to drink hot beverages with milk, coffee, and tea. A carafe is a glass container used to pour liquids, especially wine and coffee. A bottle stopper is a cylindrical or conical closure used to seal a container, such as a bottle, tube, or cartridge. The main purpose of the coaster is to cushion the bottom of the cup to isolate the heat source and prevent the tea from leaking and contaminating the tabletop. Trivet is used to burn aromatherapy or essential oil. A censer is a device used to hold candles. Candle holders can be cup containers, spherical cutouts, or both to keep the candle burning in place and secure. An ashtray is a container that holds ash and cigarette butts. Trinket Box is small chests used to store jewelry, antiques, and other precious little items. Breakfast sets can be served with food or other items such as spices. Bowl is a relatively deep, round container that is often used for meals or soups. Spoon rest is a spoon-shaped plate that holds spoons and other cookware, preventing the spoon from coming into contact with any contaminants that may be on the counter. A napkin holder is used to holding napkins to decorate the tabletop. A candy dish is a plate used to display candy.

Whom can Turkish Ceramic Products be Bought as a Gift for?

Your friends, partner, or relatives
Your children or parents
Your colleagues or classmates
Catering workers
People who need to renovate or decorate their houses
Tourists
Wedding or party guests
Collector

How Does Myros produce Ceramic gift products?

Different types of products have different production methods, especially porcelain because the production method needs to be extremely fine, and any step will affect the appearance of the final product. Most of our company's porcelain products are hand-made to ensure that the final result is of high quality, the color is bright and accurate, durable, and will not have product problems such as cracks.

What Are Other Gifts Similar to Turkish Ceramics?

Other gifts similar to Turkish Ceramic products are as follows: